Shanghai Fengqi Industry Development co.,ltd.

Your location:Home > Products > Valves > Control Valves >


CV3000-HCP Balance Cage Signle Seat Regulative

CV3000-HCP Balance Cage Signle Seat Regulative
CV3000-HCP Balance Cage Signle Seat Regulative

Structural features and applied range

CV3000-HCP balance cage single-seat regulator controls kinds of high temperature, low temperature, high pressure fluid, is a balanced regulator. Valve has compact structure, “S” streamline channel, and a contra-vane which impoves the balance of fluid flow around the sleeve, reducing the loss of pressure drop, flow is large, and wide adjustable rang, high accuracy of flow characteristics, it conforms to IEC534-1-1976 standard. Regulator dynamic stability is good, and noise is low, also with small cavitation erosion. The leakage of regulator in accordance with ANSI B16.104 ANSI standard. Regulator equipped with muti-spring diaphragm actuator, its structure is compact, and output is large.
The product conforms to the GB/T4213-92.

Technical parameters and performance indicators

body type straight single seat cast spherical valve
nominal diameter 40、50、65、80、100、150、200mm
nominal pressure
ANSI: 125、150、300、600
JIS: 10、16、20、30、40K
PN: 1.6、4.0、6.4MPa
flange connection:FF、RF、RJ、LG
flange standard:JIS B2201-1984、ANSI B16.5-1981、JB/79-59,etc
welding connection: SW(40~50mm) BW(65~200mm)
body material
cast steel(ZG230-450)
cast stainless steel(ZG1Cr18Ni9Ti、ZG1Cr18Ni12Mo2Ti、ZG316L) Ti
upper bonnet
normal temperature(P):-17~+230℃
extend I type(EⅠ):-45~-17℃ +230~+566℃
extend Ⅱ type(EⅡ):-100~-45℃ extendⅢ type(EⅢ):-196~-100℃
Note: working temperature can not exceed the various materials allowed range
gland type: bolt pressure type
Sealing packing V type PTFE packing, containing PTFE leached asbestos packing, asbestos weave packing, graphite packing
Internal components
valve core type: pressure balance core with piston rings
material SS(1Cr18Ni9Ti、1Cr18Ni12Mo2Ti、17-4PH、9Cr18、316L) SS bead weld stellite, Ti and anti-corrsive alloy, etc
type ZHA(B) multi-spring diaphram actuator
diaphragm material: NBR with nylon
spring scope 20~100、40~120、80~240kPa
air supply pressure: 140~400kPa
air source interface Rc 1/4
environmental temperature-30~+70℃
valve acting type pneumatic-close or pneumatic-open
Annex locator, air pressure filter, position valve, stroke switches, the transmitter, handwheel mechanism, etc
leakage less than 0.01% of rated volume, in accordance with ANSI B16.104-1976 ClassⅣ
return differential
with positioner: less than 1% of full stroke
without positioner: less than 3% of full stroke
intrinsic error
with positioner: less than ±1% of full stroke
without positioner: less than ±5% of full stroke
Note: using normal V type PTFE packing
adjustable scope 50:1